Printable View
So, I'm gonna have some extra space in the tobacco patch next year and I'd like to grow some pipe tobacco. I'm not a serious pipe smoker, so I'd like to here what kind of tobaccos you guys prefer.....straight tobacco, not aromatics....and why.
Do you like shag cut or cake? Roll? Flake?
I'll have room to grow about 2 or 3 varietes, maybe 10 plants of each variety. So tell me what you like in your pipe tobacco.
I'll tell you what you can shove in your pipe...
I prefer Va/Per and straight Burley...I like flakes.
Red Virginia, which is probably the most popularly grown tobacco. It's used in a lot of blends. It's probably a good starting place and there's an incredible amount of info out there.
Doc.
I'm not a pipe pro, but I have been enjoying Hal o' the wynd, which the tobacco reviews site says is a red Virginia Perique flake. But I also loves me the aromatics too.
Perique is difficult to make. It takes a minimum of 1 year fermentation under high pressure and high moisture content. I don't think that will be an option for me at this point.Quote:
Originally Posted by Tdre977
Damn, didn't realize that, Im pretty much in the dark on how most tobacco products are made, but I have been enjoying watching the progress with you guys projects.Quote:
Originally Posted by ashauler
Helps if you live in St. James Parish, Louisiana, too.:smiley2:Quote:
Originally Posted by ashauler
Doc.
Indeed.Quote:
Originally Posted by Devil Doc
this pipe tobacco thing is pretty interesting stuff. It seems that producing pipe tobacco requires some pretty particular processes. From stoving to smoking to kilning to toasting to casing to fermenting to pressure, etc...etc....etc.
I gave it a shot over the weekend, with one of the easier forms of preparation....toasting and casing. I took some pic's, but haven't downloaded them yet, I'll do that soon.
Basically, I made a very, very tiny example of a "brick" a week or so ago by stacking 6 de-veined leaves of Black Mammoth. This was actually a pile of 12 half leaves that I then cut in half again and stacked. It was about 2" or so high uncompressed. I saved out one entire half leaf and placed the other smaller cut leaves on top then folder it over like a cover.
I smashed this pile between two planks of pine board covered in plastic and squeezed the living shit out of it in a vise for 24 hours. Then I trimmed off the ragged edges and ended up with a "brick" about 1/16" thick, 3" wide and 5" long. I then put the brick in a baggie to retain it's own moisture (it was just in case when I applied the pressure, so it wasn't excessively moist) and put it in my car to absorb the heat during the day and cook.
I took some of this tobacco cut it with a pair of scissors into a shag style cut and fanned them out in a pie tin and toasted them in a toaster oven at 250 F for about 10 minutes until crispy dry.
I pulled it out of the oven and misted with distilled water.....tossed it about and misted again, until it was just moist and back into medium-case or so. Put it on the table and let it cool for about 15 minutes. Loaded the bowl and lit it up. Well. Still harsh and with a significant amount of bite on the nasal exhale....and some sting on the tongue. But. Better and smoother than before I made the brick and did the toasting and casing thing.
Next, I replaced the distilled water with sugar water made from 1/3 cup sugar mixed with 1 cup distilled water. I misted the roasted tobacco, tossed, misted, and then re-toasted the tobacco and misted again. Well. Much less harsh and with less bite on the exhale and the tongue. But. It was a bitch to keep lit. Progress, but still much to learn and experiment with.
I'm anxious to try blending, once the rest of the crop is done fermenting. I completely loaded the crop into the kiln on Saturday. I expect that process to take about a month...3 weeks before I even start sampling anything for sure.
I made a "brick" of Long Red Leaf this weekend, and hopefully by next weekend I can toast and case some of it and start mixing with the mammoth. Whippppeeeeeeeeeee.
You might try misting it with some rum...
Here are some photo's of the "bricks" mentioned in the last post. Since that date, I've had the bricks in the fermentation chamber at 110 F and 70's RH. I have not tried to prepare and smoke any more of it, but I have been smoking off the first batch I made....it really isn't all that bad. Seems as if letting it sit after preparation helps.
The first brick I made, Small Stalk Black Mammoth (my apologies for the photo quality):
http://www.cigarsmokers.com/attachme...achmentid=2106
http://www.cigarsmokers.com/attachme...achmentid=2109
Some trimmed pieces before rubbing and toasting:
http://www.cigarsmokers.com/attachme...achmentid=2105
Rubbed, toasted and cased:
http://www.cigarsmokers.com/attachme...achmentid=2110
Here is the Long Red Leaf brick that I made:
http://www.cigarsmokers.com/attachme...achmentid=2107
Trimmed LRL brick:
http://www.cigarsmokers.com/attachme...achmentid=2104
Since I made this LRL brick, both bricks have been in the fermenting chamber at around 110 F. I kept them in sealed baggies so that the only moisture involved in the fermentation was already contained in the leaf.....and also to prevent the introduction of oxygen into the process. Anaerobic fermentation is the method used to produce perique, for example, and I'll be interested to see how/if it changes the flavor and smoking quality of this tobacco.
We'll see what happens. Thanks for looking.
This is a good experiment. If you decide to grow varieties specifically for pipe tobacco next year, you should have the process down to a science. Thanks for documenting this and sharing the photos.
Have made the decision to expand next year. Here is the plan so far:Quote:
Originally Posted by Smoked!
Cigar tobaccos:
Small Stalk Black Mammoth
Florida Sumatra
Havana 142
CT Broadleaf
PA Broadleaf
Pipe tobaccos:
Burleys:
Tenn. Red
Ergo
Yellow Twist Bud
Orientals:
Ottoman
Samsun
Turkish Gold
Beinhart
Flue cured:
Orinoco Blanco
Rebo de Gallo Negro
Lots of room for experimentation there.
So... You're quitting your job to farm full time? On second thought, growing and harvesting are the easy steps in the production. It looks like you'll have quite a bit of processing to do after the harvest. Any plans for the flue cure process?
You are exactly right.....growing and harvesting are the easy parts, but I needed something to do over the winter, thus the expansion into different strains and different end uses for the tobacco. Lots more room to play around with pipe tobacco then there is with cigar leaf.Quote:
Originally Posted by Smoked!
I plan on modifying my kiln just a bit to function for flue curing as well as fermentation. Since flue curing begins while the leaf is still green, I should be able to use the kiln for both purposes during the same season. I'll flue cure the appropriate strains while the primings from the cigar tobacco are color curing and drying. That's the plan anyway. :smiley2:
Sweet. Awesome. Sweet.
Maybe try a soaking a vanilla bean in the sugar/water solution for a while??
Don't know but cool ass project. When I get some of these trees down I'm giving the pipe tobacco a try.
Very interesting...Post some reviews after you smoke some.
Got plans for honey, vanilla, rum, and whiskey flavorings next. For these I think I'll use a processing called stoving. From my reading it seems as if this will infuse the flavor better.Quote:
Originally Posted by nhcigarfan
Oh, and next year, with the varieties that I'm growing I'll get to try to produce some form or other of Latakia as well.
Of course, I'm not abandoning the cigars and non-cased pipe tobacco either. I'm convinced that a good smoking tobacco, very reminiscent of a cigar, can be created for a pipe.
BTW, let me know when and what type of seeds you need. :smiley4:
I will. When I have the room a garden it will be.
Jeepers. Nice job, Jamie. Very impressive.