Poker Table

[WOXOF]

Cup holders were easy. 3-3/8 hole saw worked perfect

Actually, I was more afraid of the beers being spilled on the table. Plus, I load mine up and take it to people's houses that are hosting the tourney. Our next tourney is May 5th, come on down.

[Bassfever]

Actually, I was more afraid of the beers being spilled on the table. Plus, I load mine up and take it to people's houses that are hosting the tourney. Our next tourney is May 5th, come on down.

The felt I used is the suited speed cloth and this comes with scotch gaurd. the foam I used under it was 1/4" closed cell volara. the closed cell will not absorb. This way any spills should come right up. I hope I dont have to test this though.

[UpStateMike]

my table gets trashed on a weekly basis. It's not if you will get beer spilled on it, just when.

Nice job btw. I'm gearing up to make a really nice one with speed cloth, racetrack, maybe even the runner lights.

The pats logo would be fairly easy to make a stencil and airbrush onto the cloth. Go for it.

[Bassfever]

I almost put the rope lights in it. all you have to do is add 1/2 plywood around the rail and tuck in under

[WOXOF]

The felt I used is the suited speed cloth and this comes with scotch gaurd. the foam I used under it was 1/4" closed cell volara. the closed cell will not absorb. This way any spills should come right up. I hope I dont have to test this though.

I went with the speed cloth as well. I skimped on the volara though. You should paint the Pats logo in the middle, that would ad a nice touch. I painted our league logo on mine.