Results 1 to 8 of 8

Thread: Info on this water gel/beads?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    I did some google searching and hit this thread http://www.cigarpass.com/forums/inde...c=32186&hl=gel ; basically the last post mentions this is the same gel used in the tubes. Except the tubes use some sort of agent to control the mositure.

    Right now I've just got a water pillow, and only about 10 AF Flor Fina 8-5-8 cigars in my tupperdor..

    Any opinions?

  2. #2
    Join Date
    Sep 2006
    Location
    Wichita, KS
    Posts
    7,539
    Blog Entries
    56

    Default

    The rh beads are formulated in such a way that the moisture release/absorption is controlled to maintain a target rh%. The beads also function in two directions, i.e. pull moisture out of the air, and release it into the air.........I think this is the difference.

    Try here for info http://www.heartfeltindustries.com/.

  3. Default

    Anybody know how long to keep a pillow in a humi? Many places say that they are supposed to be tossed after a single stint in a travel humi, but does anybody have a time-table for how long a single one will last?

  4. #4

    Default

    Keep reusing it until it fails. I have some gel jars in my cooler, the same stuff in the pillows, and they say there are good for a couple of months or one recharge.

    I've recharged them literally dozens of times and they are at least 2 1/2 years old.

  5. #5

    Default

    Quote Originally Posted by ashauler View Post
    The rh beads are formulated in such a way that the moisture release/absorption is controlled to maintain a target rh%. The beads also function in two directions, i.e. pull moisture out of the air, and release it into the air.........I think this is the difference.

    Try here for info http://www.heartfeltindustries.com/.
    Thanks for clearing that up, I guess I should've read the thread I dug up from google more as well. It mentions something similar. The tubes from heartfelt seem like what I am going to order tomorrow. Thanks for the response.


    I threw a water pillow in with my 858s and had it in a airtight container for a couple days now, I threw in one of my many accurite therms/humidity in to see what the reading was I got a reading about 90%.. I know these meters are probably alittle off... but that seems like a high reading?

  6. #6
    Join Date
    Sep 2006
    Location
    Wichita, KS
    Posts
    7,539
    Blog Entries
    56

    Default

    Do a search for Salt Test........then do it on the hygrometer and see where it is. Yes, 90% is way too high.

  7. #7

    Default

    Quote Originally Posted by ashauler View Post
    Do a search for Salt Test........then do it on the hygrometer and see where it is. Yes, 90% is way too high.
    Sounds great found some info on it, I'll test it on some of the hygrometers I have.

    Thanks again.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •