New/Recommendations

[dryad]

Hi all,

I'm 24, from Ireland and actually I have never smoked a cigar before, or a cigarette for that matter, but I would love to try a cigar sometime.

I was wondering if anone could suggest a good cigar to start with, that would be easy for a complete beginner like me to smoke? If it helps I tend to prefer mild and sweet as opposed to strong and bitter when it comes to food and drinks so I imagine the same might hold true for a cigar.

Thanks!

[ashauler]

Welcome to the board from Kansas, U.S.A. What attracted you to cigar smoking?

[mrtr33]

Check out your local listings for a tobacconist. Usually referred to as B&M's (brick and mortars) here in the forums, visiting them one day on a whim introduced me into the world of cigars. He provided me with information, provided suggestions for cigars based on my beer preferences (color, strength), and overall, didn't pressure me into purchasing something expensive. Instead, he encouraged quite the opposite, having me try cheaper smokes first. As my tastes became more refined, I tried better sticks, but I feel I had at least a little bit of education behind my purchases and cigar selections. Just an idea.

[FunkyCold5]

Welcome from the US of A, specifically Virginia.

Really mild smokes to consider and the price are pretty decent:

5 Vegas Gold
Perdomo Reserve Champagne

Andrew

[gopyerk]

Welcome from the US of A, specifically Virginia.

Really mild smokes to consider and the price are pretty decent:

5 Vegas Gold
Perdomo Reserve Champagne

Andrew

Amen to Reserve Champagne, I wish they were around when I started smoking....

Another interesting try for someone new would be the Cuvee Blanc by Cusano

[Smoky Contemplation]

Welcome from Cali.

They might be a little strong for a first smoke but I always recommend the Hoyo De Monterey Excalibur line......Conn or Maduro wrapper (Maduro being a little sweeter). This was the first cigar that I truly learned to enjoy. It's more medium in strength but I guess strength is all relative to the individual. Good luck.

[mithril]

so did you try any cigars yet?

[dryad]

No I decided to leave the Macanudo in the end, too many comments about how bland it was floating about so I think it was the rigt choice. I'm gonna see if I can get a hold of any of the cigars you guys recommended in this thread instead. Yeah, I'm in no rush

One thing I'm kinda worried about though is lighting the cigar, I've heard it's very easy to ruin it if you do it wrong. Anyone got any tips on that, I'd hate to make a mess of it and destroy a good cigar.

[debo08080]

i'm new to cigars but here's my advice on lighting. I use a torch but i guess it goes with any method.

1. GO SLOW. if you go too fast you'll burn it and make the first while very very bitter.

I start by preheating the foot of the cigar to get it ready. then after it is properly preheated i go in circles around the foot. just take your time with it. after that for the most part you should be good, after a couple draws look at the foot again and see if the stick needs to be touched up (if its not burning evenly).

[Shelby07]

Don't worry too much about lighting the cigar - as debo said, go slowly. Toast the foot of the cigar evenly before you light then be sure the edge is lit all around before you actually light the cigar.

Be more concerned about cutting the cap. Most new guys just pick a spot and cut away. If you cut too much off the cigar will unravel. Look for the first seam in the cap (closest to the tip) and just take enough off to remove the cap.

There are some good threads in this forum about cutting the cap and lighting the cigar. Don't be afraid to ask the guys at the B&M for tips on cutting and lighting.

Welcome.

[olisiponense]

Hola.

I would recomend you to try a Cuban Rey del Mundo Choix Supreme (Hermosos nº4 vitola).

Regards,

Ricardo.

[debo08080]

Don't worry too much about lighting the cigar - as debo said, go slowly. Toast the foot of the cigar evenly before you light then be sure the edge is lit all around before you actually light the cigar.

Be more concerned about cutting the cap. Most new guys just pick a spot and cut away. If you cut too much off the cigar will unravel. Look for the first seam in the cap (closest to the tip) and just take enough off to remove the cap.

There are some good threads in this forum about cutting the cap and lighting the cigar. Don't be afraid to ask the guys at the B&M for tips on cutting and lighting.

Welcome.

basically i do the same thing every time and it has never led me wrong.

basically to cut i put the cigar's head on a table and put the cutter flat on the table and thats how much to cut. thats what they taught me at my B&M and it has worked fine. I've never had a cigar unravel on me.