Why don't more people use punch cutters?

[botlJack]

Each individual cigar smoker, has their own go to cut method. I prefer to use the double blade guillotine cutters.

[Devil Doc]

If any of you guys want to try a punch cutter, but don't want to spend any money, get yourself a .45 Colt or .45 acp spent cartridge and chamfer the inside edge. It works great and automatically stores the cut piece.

Doc

[guado]

It all depends on the cigar I am smoking as to which method to use.

[hed]

If any of you guys want to try a punch cutter, but don't want to spend any money, get yourself a .45 Colt or .45 acp spent cartridge and chamfer the inside edge. It works great and automatically stores the cut piece.

Doc

I was thinking about giving that a try, except using various caliber rifle shells like a .223, .30-06, and .45-70, to cover the different RGs being cut. It would give you more to grip, plus more storage space for the scraps. If you feel froggy and want a keychain version that will punch two different diameters, take a .223 or a .30-06 shell and cut off the flange-end about an inch before the shell begins tapering down to the bullet end.

[kevin7]

I have a .357 and a .44 shell my reloading friend chamfered for me. I dont use punches but they are cool

[craig]

I find fingernails work fine for most of the cigars that I smoke ... for the rest, I find Palio offers more control than Xikar. (I have Perfect Cutters for the car.)

[OrCal15]

I love a punch cutter. Lately I have been using the mistake free cutter.

http://www.cigarsolutions.com/precis...-cutter-metal/

[Disney Lincoln]

That's the cutter I use every day. I used to use a notch cutter but found this double cutter leaves a better end and I don't get as much tobacco in my mouth. I got it off of Amazon. I like that I don't have any mistakes. I just center the stick in the little rear hole and snip and it's a perfect cut every time.

[nhcigarfan]

If any of you guys want to try a punch cutter, but don't want to spend any money, get yourself a .45 Colt or .45 acp spent cartridge and chamfer the inside edge. It works great and automatically stores the cut piece.

Doc

I did this with a .357 and it worked well.

I have a xikar punch on my key chain I use when I don't have a guillotine. But I prefer the guillotine.

As for guillotines, my xikar is nice looking but I still get the best cuts out of the cheap-o's you can pick up at the register of any cigar shop. The blades are thin and sharp making for a clean cut. I've had my xikar pinch cigars. I attribute it to the twin blades being so thick and not because it has gotten dull. I drop it all the time and am on my 4th or 5th due to the great warranty they come with.