Working on your buoyancy will probably help your photography as much as getting a nicer camera would. I always do a dive without the camera to make sure I am properly weighted/trimmed (and just look around) - then when I go down with the camera I don't have to worry about buoyancy. Being correctly weighted is crucial. At the end of your first dive (so your air tank is at 500psi) hang around with your buddy at the surface for a couple minutes... Take a normal sized breath and empty the air from your BCD completely. You are supposed to float at eye level holding a normal breath. If you sink, you are over-weighted (hand some weight to your buddy to hold and try it again). Figure out exactly how much weight you need to float at eye level and that is what you'll want to use for your next dive. You may also want to check your trim... go underwater and swim a couple fin kicks... then don't move and see what happens. You might start to barrel roll left or right, or your feet may head up or down... move your weights around (front or rear pockets on the BCD, ankle weights, etc.). Practicing buoyancy "drills" can also be very helpful - like hanging upside down (very helpful when taking pictures of critters), or the "fin pivot" skill they teach in the cert. classes.
Sheesh, that was a long paragraph...
Anyway, I use a Canon G10 in the Fisheye Fix housing with a Sea&Sea strobe and Bossk focus light. I highly recommend the Canon G10. No, I HIGHLY recommend it. The G11 and G12 are newer models, but the G10 is the better of the three in my opinion. You can pick them up used in great condition for around $300. Absolutely fantastic point & shoot. The Fix housing I have is not worth the price you'd pay for it - the Ikelite or standard Canon housing would suffice ($200 used Ebay). The Sea&Sea strobe ($150 used Ebay) is a must, but you could probably get along without the focus light unless you were shooting movies. So you'd be looking at around $700-$800 for a very decent "amateur" setup. Underwater photography is a lot of fun, but like every hobby it can be expensive. Especially when you flood the housing (not if... when).
My setup:
![]()





Reply With Quote
Bookmarks