Not that it is necessary, but a digital hygrometer is best in my opinion and recommended. I got a Credo. You can check out the digital models on a number of internet sites. The beads from Heartfelt industries also come recommended.
Not that it is necessary, but a digital hygrometer is best in my opinion and recommended. I got a Credo. You can check out the digital models on a number of internet sites. The beads from Heartfelt industries also come recommended.
So is the glycol solution not needed?
Also what do the beads do?
Thanks in advance
I personally wouldnt even wipe down the interior with water. Just set a shot glass of distilled water in it and leave it for a couple days to a week. I heard wiping it can potentially warp the wood because of the sudden change in moisture content, although I haven't seen this happen myself.
"smoking is one of the greatest and cheapest enjoyments in life,
and if you decide in advance not to smoke, I can only feel sorry for you."-Sigmund Freud
"The problem with the world is that we draw the circle of our family too small" - Mother Teresa
“The basic difference between an ordinary man and a warrior is that a warrior takes everything as a challenge while an ordinary man takes everything either as a blessing or a curse” – Carlos Casteneda
glycol and beads don't mix.Originally Posted by Mikeyp1121
The beads hold and release mosture in small amounts and help level off the RH in the cooler/humi
Choose, one or the other. Either get the beads and let them regulate the humidity in your humidor. If you don't want to get the beads you can use the "sponge" humidifier with the propylene glycol/distilled water solution.
directly MAY NOT be a good idea. It can cause warpage as Roham pointed out.
However...if your humidor is SOLID cedar then it probably won't hurt it for the initial conditioning. It's easy to see if your humi is made of a single layer of wood. Most inexpensive ones are.
If your humidor is a more costly one it may be a box within a box, e.g. a hardwood exterior lined with spanish cedar. If this is the case, you are asking for trouble if you wet the interior as previously stated. It will cause the interior lining to warp.
Also, regardless of the type of humidor, wetting ANY kind of wood causes the grain to become raised creating a somewhat rough surface.
If you have the patience to wait a week, do it as Roham suggested. Use a small glass filled with water or use a very damp, CLEAN sponge placed on a small tray or dish inside the humi ( a bit better ). Leave it closed for a week or so and the wood will take up the moisture slowly and naturally. You can then begin using the humidor to store cigars.
Always use distilled water.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks