Results 1 to 14 of 14

Thread: Fock!!!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2005
    Location
    That much further west
    Posts
    2,420

    Default Fock!!!

    Ok, so I am strumming along happily this morning doing some online bill paying when my wife lets out a series of screams. I run out of the den to the family room and there she is scamperring about with a bunch of towells. Water is leaking from three different areas on the ceiling and through the upper heating vents. Water (sewage) is also coming through the toilet and bathtubs of two of our bathrooms? I turned off the house water and called the plumber. Two hours later they show up dumbfounded and start cutting random holes in my ceiling.

    Verdict- my yougest son placed a toy down the toilet which caused a major back-up to the tune of $500. That could have been worse, I guess. Problem now is that I am staring at a couple of giant holes in my ceiling- in is about 2 ft x 2 ft- the other is about 2 ft x 3 ft.

    Anyone have any experience with this type of repair job? Would it be worth it to do myself vs. having someone come in to do it? My homeowners deductible is $500 and I have no clue what it would cost for someone else to do. Either way, I am sure this is not going to be fun.
    Mama said a lot of things and be thankful was the one she never minded saying twice

    --Drive-By Truckers

  2. #2
    bigpoppapuff Guest

    Default

    just got done with a drain in my basement backing up....two days of flooding...with boxes still on the floor,not opened,from my move......the damage??.....untold..but it ain't pretty...i know what you're going through,james...

  3. #3

    Default

    Call a repair guy and get an estimate.... then compare it to your deductible.

    Unfortunately (I'm guessing here) dry wall work on a ceiling is a PITA because it's a real beeatch to match up as well as being overheard work. The actual part of filling the holes isn't that bad it's coating, texturing, and painting so it's not noticeable. If you have the time and are a bit of a handy man I'd say DIY.
    Seatbelts save lives, my best friend and I are alive because of them.

    Nobody is ever gone as long as there is someone to remember them.

  4. #4
    Join Date
    Mar 2006
    Location
    Iowa City, Iowa
    Posts
    1,000

    Default

    Those holes are small enough you will only need one 4x8 sheet of drywall.

    Texturing to match what you already have is the biggest pita.

    If it was me, I'd do it myself. It really isn't that hard. Shouldn't take more than a couple hours plus painting.

  5. #5
    Join Date
    Oct 2006
    Location
    Sunny Shores of Lake Michigan
    Posts
    278

    Default

    Yikes that's a crappy way to start the day.

    Unless the ceiling is really high, I would vote DIY. Like others have said, the hardest thing will get it to match up cosmetically.

  6. #6
    Join Date
    Apr 2005
    Location
    Precipitously close to disaster.
    Posts
    7,007

  7. #7
    Join Date
    Apr 2005
    Location
    Cape Breton Island, Nova Scotia
    Posts
    6,816
    Blog Entries
    2

    Default

    Is there a sprayed on finish on your drywall ceiling? If there is, you'll need to hire someone to respray the ceiling. If not, you could fix it yourself but it's a whole lot of work.
    TBSCigars - "On Holiday"
    Grammar - It's the difference between knowing your crap and knowing you're crap.

  8. #8
    Join Date
    Dec 2005
    Location
    19 58.7N 75 49.4W
    Posts
    1,893

    Default

    So who sent the cigars?

    Just kidding bro, for a minute I thought you were going to say someone bombed the hell out of you.

    I would get an estimate first to see how much it would cost. It won't be cheap even though it's a small area.

    You could DIY for less than a $100 depending on what tools you have. As stated before, the biggest pain will be matching the texture of the ceiling. You can get aerosol cans of ceiling texture at the hardware store. Just a heads-up though, these usually only cover about 2 or 3 square feet with each can. They also make a hell of a mess. I've used them on a couple of occasions with pretty good results. I could tell where the work had been done, but only because I knew about it (plus I'm a perfectionist). If you have smooth ceilings it should be a piece of cake.


    If you DIY and dont have any drywall tools let me know. I have some that I could lend you.

  9. #9
    Join Date
    May 2005
    Location
    Rhineland-Palatinate
    Posts
    2,390
    Blog Entries
    6

    Default

    Ouch. I'm not a handyman so I can't tell you what to do. However, that is not a good way to start the day.

  10. #10
    Join Date
    May 2006
    Location
    CROOKLYN NYC
    Posts
    1,773

    Default

    This is not a good way to start a weekend, let us know how you are doing

  11. #11
    Join Date
    Oct 2006
    Location
    Sunny Shores of Lake Michigan
    Posts
    278

    Default

    omg, the day after I read this, my wife discovered water in my basement. It's leaking all the way down the drain pipe from the shower upstairs. Arrgh. Now it looks like I have to cut a hole in the adjacent bathroom wall.
    I am a DIYer, even if it means I end up doing extra jobs due to my f-ups.
    Sigh...

  12. #12
    Join Date
    Apr 2006
    Location
    Westminster, CO
    Posts
    2,067

    Default

    Quote Originally Posted by sprangalang View Post
    omg, the day after I read this, my wife discovered water in my basement. It's leaking all the way down the drain pipe from the shower upstairs. Arrgh. Now it looks like I have to cut a hole in the adjacent bathroom wall.
    I am a DIYer, even if it means I end up doing extra jobs due to my f-ups.
    Sigh...
    Check your grout in between your tiles and the calking around the tub base, and also the seal around your drain. Even the smallest crack in grout can cause the water to leak behind the wall and get under the shower basin. From there it follows the drain pipe. If you see a crack in the grout, regrout the area.

  13. #13
    Join Date
    Oct 2006
    Location
    Sunny Shores of Lake Michigan
    Posts
    278

    Default

    Thanks Shelby. But I think it's gotta be behind or under. It's one of those combo tub-shower jobs, so I have a strong feeling it's the tub drain assembly - or the supply after the diverter, or the diverter. Either way, I have a feeling, it's a hole in the wall I must make.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •