New Tupperdor

[spiffykyle]

The first thing I did was to attach the weatherstrip tape to the inside of the lid of the box. This stuff is self-adhesive so it was just cut, peel and stick:




Here it is finished:




As you can see the lid still fits and the locking handles hold it down tight, hopefully creating a nice seal, but still somewhat breathable.




Next I used a 5/8" spade bit to drill some holes in the bottoms of all the trays to make sure air could move around inside the box. It was hot outside (I'm in Houston) so I stayed indoors. I used the pan so that all the plastic shavings didn't get stuck in the carpet.




Next up...humidification!!

spiffy