yeah, I was looking at the price of the trays (you can buy in bulk) but it's still going to cost me over $300 for 48 of 'em. So the questions now is: Do I divide up the bottom and section it off and just stack cigars and have maybe two or three shelves on top? I'm not sure where to go from here... anybody have any ideas?
Thanks for looking everybody!
"It is best to keep your mouth shut and be presumed ignorant than to open it and remove all doubt."
-Mark Twain
"If there are no cigars in Heaven, I shall not go."
-Mark Twain
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-George Orwell
snapping whippers
Have you thought about using a couple drawers at the bottom and then having a couple trays on top? I'd use an extra tube of beads like Jamie suggested.
-Buzz
mrtr33's comment: "Why did Buzz get credit for the tray idea, but I didn't get credit for the humidity bead calculator?"
Originally Posted by badwhale
Drawers... damn, wish I'd thought of that... well, guess that means back to the drawing board.
By the way...oops, just figured out who mrtr33 is... now I understand. I apologize for not giving you the proper credit, mrtr33.
Last edited by jimmy; 01-20-2011 at 10:21 AM. Reason: because I can't read...lol
"It is best to keep your mouth shut and be presumed ignorant than to open it and remove all doubt."
-Mark Twain
"If there are no cigars in Heaven, I shall not go."
-Mark Twain
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-George Orwell
snapping whippers
Something like this:
Or you could go crazy:
-Buzz
mrtr33's comment: "Just giving you a hard time."
I suck...
For the price of the trays I would recommend the drawers also. The important part (and difficult part) will be getting the drawers to seal up properly. Best of luck to you, I wanted to do something like this also but my laziness caught up to me and I just bought a cooler.
"I would call that person a puffnozzle" ~mrtr33
Right now, the drawer I've drawn up is 2.25" tall and fits tightly inside the humi. I'm thinking to help with the seal, I'll embed some magnets in the sides (at the front) to keep the drawer tightly closed. As for the top trays, I think I'm going to do two trays, the full width and length of the humi, so 30" wide, 25" deep with dividers to seperate sections. The interior that is not occupied by the drawer is 8" tall, 25" x 30" with 3 dividers at a ten inch gap between them.
Thanks for all the comments and critiques! Keep 'em coming!
"It is best to keep your mouth shut and be presumed ignorant than to open it and remove all doubt."
-Mark Twain
"If there are no cigars in Heaven, I shall not go."
-Mark Twain
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-George Orwell
Go over to Steve's and check his custom humi out; it'll give you some ideas as to what will and won't work.
"...all roads lead to cigars."
-Cinda
"You will not change this forum. Simple as that. Accept it or move on, or you will be escorted from the premises."
-Shagaroo
"Maybe you should just stop trying to be witty?"
-Ashauler
"Rule 17: Don’t turn your back on bears, men you have wronged, or the dominant turkey during mating season."
-Dwight Schrute
"Fuck I just like smoking. Who am I kidding?"
-Badwhale
"If you want to start a fuckin' hobby, start it."
-Shelby07
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks